Description
Part Number:		Grind Number:
Lifter Type:	Hydraulic Lifter	Engine Family:	Ford 351W 8 cyl. 1969-1995
Description:	Hydraulic-Moderate high performance street driving. Mild Street Machines, stock drive line. Noticeable idle.
Cam Family:	High Energy™ Hydraulic Flat Tappet Camshafts
Specifications				Intake		Exhaust
RPM-Range:		Valve Lash:
Valve Timing:		Duration:
Lobe-Center Angle:		Duration @ .050" Lift:
Intake Centerline:		Valve Lift:
		Lobe Lift:
Installation Notes [7] Stock springs cannot be used. [3]5 Part #4504 studs required for ‘78-present. [56] If equipped with studs and guide plates use part #1442-16. [33] Pre-’72 engines use part #3220. [3] Valve spring oil shield available.
		Valve Timing @ 0.006" Lift:		Open		Close
			Intake Exhaust	BTDC ABDC BBDC ATDC
Recommended Components
Complete K-Kit Cam, Lifter & Gear GK-Kit Small SK-Kit Cam & Lifter CL-Kit K35-218-3 N/A SK35-218-3 [7] CL35-218-3 [7] Rocker, Push Rod RP-Kit Lifter Kit Timing Set Gear Drive RP1436-16 [35] 832-16 3230 [33] N/A Rocker Arms Push Rods Valve Springs Retainers 1431-16 [35,56] 7835-16 942-16 972-16 768-16 [3] 747-16 [3] N/A Valve Locks Valve Seals Lash Caps Rev Kit 601-16 611-16 502-16 N/A N/A Distributor Gears Stud Girdle RPM kit Spring Locator N/A N/A N/A N/A Cam Phaser Limiter Kit Spring Seats Camshaft Break-In Lube N/A N/A 159