Videos Contact Us
Search   
Skip Navigation LinksSkip Navigation LinksSkip Navigation LinksSkip Navigation LinksSkip Navigation Links
 
*SBC - 1955-57 models have an oiling groove in the rear journal. The listed part numbered cams will not fit these models, so if you require a camshaft with the oiling groove, please call us at 1-800-999-0853 or click here to contact us, and we will assist you with placing an order.
Description  
Return to Store Item
Part Number: Grind Number:
Lifter Type:
Engine Family:
Description:
Cam Family:
Specifications     Intake Exhaust
RPM Range: Valve Lash:
Valve Timing: Duration:
Lobe Separation:   Duration @ .050" Lift:
Intake Centerline: Valve Lift:
    Lobe Lift:
Valve Timing @ 0.006  Lift:      
  Exhaust
Closes 18
  ATDC
Opens 72
  BBDC
109 Valve Timing Diagram
Intake  
21 Opens
BTDC
59 Closes
ABDC  
Recommended Components
ComponentPart Number
Complete K-KitK12-465-8 [10,46]
Small SK-KitSK12-465-8 [7,10,46]
Cam & Lifter Kit CL-KitCL12-465-8 [7,10,46]
Lifter Kit853-16 / 15853-16
Timing Set2100 / 7100
Rocker Arms1416-16 [77] / 1602-16 [77]
Push Rods7809-16 / 7609-16
Valve Springs26986-16 [2]
Steel Retainers787-16 / 1787-16
Valve Locks601-16 / 648-16
Valve Seals501-16 / 503-16 [2]
Distributor Gears12200
Camshaft Break-In Lube159
Installation Notes (These notes apply to the above recommended components with the trailing installation note numbers)
NoteDescription
2[2] Requires machining on cylinder heads.
7[7] Stock springs cannot be used.
10[10] Requires thrust button & wear plate.
46[46] Must use bronze tip fuel pump pushrod when using high pressure or high volume pump.
77[77] Engines with self-aligning rocker arms must use part #1418-16 or #1618-16
        Contact us via email
   
Return to Store Item
PERFORMANCE
PARTNERS
2007-2011 Copyright by: COMPCams.com. All rights reservered.