Videos Contact Us
Skip Navigation LinksSkip Navigation LinksSkip Navigation LinksSkip Navigation LinksSkip Navigation Links
*BBC - 1965-66 396 c.i. models have an oiling groove in the rear journal. The listed part numbered cams will not fit these models, so if you require a camshaft with the oiling groove, please call us at 1-800-999-0853 or click here to contact us, and we will assist you with placing an order.
Return to Store Item
Part Number: Grind Number:
Lifter Type:
Engine Family:
Cam Family:
Specifications     Intake Exhaust
RPM Range: Valve Lash:
Valve Timing: Duration:
Lobe Separation:   Duration @ .050" Lift:
Intake Centerline: Valve Lift:
    Lobe Lift:
Valve Timing @ 0.006  Lift:      
Closes 18
Opens 70
108 Valve Timing Diagram
22 Opens
58 Closes
Recommended Components
ComponentPart Number
Complete K-KitK11-302-4
Small SK-KitSK11-302-4 [7]
Cam & Lifter Kit CL-KitCL11-302-4 [7]
Rocker Pushrod RP-KitRPM1411-16
Lifter Kit812-16 / 858-16
Timing Set3210
Rocker Arms1411-16 [17,18] / 1320-16 [17,18]
Push Rods7854-16 [16] / 7954-16 [16]
Valve Springs911-16 / 924-16 [2]
Steel Retainers744-16 / 741-16
Valve Locks603-16 [75] / 612-16 [75]
Valve Seals504-16 / 505-16 [2]
Camshaft Break-In Lube159
Installation Notes (These notes apply to the above recommended components with the trailing installation note numbers)
2[2] Requires machining on cylinder heads.
7[7] Stock springs cannot be used.
16[16] Truck engines have .400” taller block.
17[17] Mark V and Mark VI heads must use kit w/studs.
18[18] 50-state legal for ‘93 & earlier B.B. Chevrolet V8, 396-454 c.i., C.A.R.B. E.O. #D-279-4.
75[75] Most aluminum heads come standard with 11/32” valve stems. Use appropriate valve locks, retainers, and seals.
        Contact us via email
Return to Store Item
2007-2011 Copyright by: All rights reservered.