Videos Contact Us
Skip Navigation LinksSkip Navigation LinksSkip Navigation LinksSkip Navigation LinksSkip Navigation Links
*SBC - 1955-57 models have an oiling groove in the rear journal. The listed part numbered cams will not fit these models, so if you require a camshaft with the oiling groove, please call us at 1-800-999-0853 or click here to contact us, and we will assist you with placing an order.
Return to Search Results
Part Number: Grind Number:
Lifter Type:
Engine Family:
Cam Family:
Specifications     Intake Exhaust
RPM Range: Valve Lash:
Valve Timing: Duration:
Lobe Separation:   Duration @ .050" Lift:
Intake Centerline: Valve Lift:
    Lobe Lift:
Valve Timing @ 0.006  Lift:      
Closes 20
Opens 68
106 Valve Timing Diagram
28 Opens
60 Closes
Recommended Components
ComponentPart Number
Complete K-KitK12-210-2
Small SK-KitSK12-210-2 [7]
Cam & Lifter Kit CL-KitCL12-210-2 [7]
Rocker Pushrod RP-KitRP1412-16 / RPM1301-16
Lifter Kit812-16 / 858-16
Timing Set3200 / 2100
Rocker Arms1412-16 [15,52] / 1301-16 [15,52]
Push Rods7812-16 / 7372-16
Valve Springs981-16 / 983-16
Steel Retainers742-16 / 751-16
Valve Locks601-16 / 613-16
Valve Seals501-16
Camshaft Break-In Lube159
Installation Notes (These notes apply to the above recommended components with the trailing installation note numbers)
7[7] Stock springs cannot be used.
15[15] 50-State legal on ‘93 & earlier S.B. Chevrolet V8, 262-400 c.i., C.A.R.B. E.O. #D-279-4.
49[49] 50 State Legal for ‘87 & earlier carbureted V-8 Small Block Chevrolet 262-400 C.A.R.B. E.O. #D-279-3, D-279-3, D-279-5, D-279-6.
52[52] Engines with self-aligning rocker arms must use part #1417-16 or 1317-16.
        Contact us via email
Return to Search Results
2007-2011 Copyright by: All rights reservered.