Free #1221 Air Cleaner With AVS or Performer Carb Purchase Shop Edelbrock

CUSTOMER TESTIMONIALS

Are you running Edelbrock Group products? Do you have a story about Edelbrock Group Products that performed beyond all of your expectations? Then "Submit Your Testimonial" below, show us what you got and share your story with other performance enthusiasts.


Riley Schlick-Trask

Location: Bradenton, FL
Edelbrock Parts Installed: All Carburetors and 1477 rebuild kits
HP and TQ:
Testimonial: My father taught me how to rebuild Edelbrock Carbs when I was 14 so I could save up for my first car. When word got out a young lady was rebuilding Edelbrocks, the car community rallied, and my business exploded. To date, I have rebuilt over 150 carbs, I bought my first car (jeep) paid for it myself, bought the lift kit, paid for the paint job (Jurassic Park 08). Now I am saving for college.



Jerry Haley

Location: El Paso, TX
Edelbrock Parts Installed: 1406 Endurashine Dual Carburetors
HP and TQ: 490 HP
Testimonial: I used a 1963 425hp 409 motor for my build up. X block motor is punched .070 over, -583 casting performance heads with Manley oversized valves. On top on the original dual quad intake is a set of Edelbrock 600 cfm Endurashine carburetors. One is with electric choke and the other is with choke secured open. Though with large cam and roller rockers, this engine fires on less than a half revolution and the carbs have not required any further adjustment for the past eight years. This is in an original Henry '32 Ford body with 4 speed, air conditioning, electric windows and trunk. Frame is Pete & Jake with four wheel disc brakes. Great everyday cruiser with perfect operation from Edelbrock induction.



Nick S.

Location: New York, NY
Edelbrock Parts Installed: Pro Flo 4 EFI Engine Management System, Victor Jr Single Plane EFI intake manifold and fuel rails, 36 lb/hr fuel injectors
HP and TQ: 500 HP / 500 TQ
Testimonial: Pro Flo 4 EFI is the easiest system I have ever installed and tuned. This LS2 swapped AWD Subaru needed a short runner intake manifold to make power at higher rpms to make use of the short gear ratios and Edelbrock came through with their plug and play ecu.



Michael Fennell

Location: Kennesaw, GA
Edelbrock Parts Installed: Carburetor
HP and TQ: 355 HP
Testimonial: Best carburetor I have had on any of my street rods.



Daniel Kroeze

Location: Tampa, FL
Edelbrock Parts Installed: Edelbrock camshaft, Edelbrock cylinder heads, Edelbrock Proflo 4 E.F.I and Edelbrock fuel pump
HP and TQ:
Testimonial: I swapped out the stock 1965-289 c.i for a 1985 302 H.O. I selected the Edelbrock Proflo4 E.F.I system, Edelbrock top end kit, and Edelbrock fuel pump. The installation and setup was great. The performance, and power are all there. Very satisfied!



Bob Entigar

Location: Tolland, CO
Edelbrock Parts Installed: Crate Engine
HP and TQ: 320 HP / 383 TQ
Testimonial: Perfect engine for the car. Near zero maintenance and awesome performance for the 2200 pound vehicle weight. Factory Endurashine treatment is a plus and helps tremendously at shows.



Mike MacDonald

Location: Huntsville, TX
Edelbrock Parts Installed: Pro flo 4 XT and fuel sump
HP and TQ: 330 HP
Testimonial: I purchased a restored 1957 Chevy 2 door post that had a 350 with TPI that was tired and leaking. Over the winter I installed a new Chevy 350 crate engine with Edelbrock's Pro Flo 4 XT. I chose Edelbrock not only for their reputation but also because of the remote mounted computer that I could get out of the hot engine bay. The car runs as good as it looks now. Thanks Edelbrock!



Eric

Location: West Sayville, NY
Edelbrock Parts Installed: E Force 2300 stage 2 supercharger
HP and TQ: 700 HP
Testimonial: I’ve been running my E force on my C7 Corvette for a few years now and it’s been a blast. The car also has long tube headers, cold air intake, 95mm TB and meth with a custom tune.



Ivan Goldenberg

Location: Point Pleasant, NJ
Edelbrock Parts Installed: AVS2 800 and Torker II Intake
HP and TQ: 421 HP / 452 TQ
Testimonial: Had a Holley 850 Brawler on her and swapped to the Edelbrock AVS2 800 electric choke. It woke her up for sure... Edelbrock tech line has been quick and helpful.



Ricky Googe

Location: Silver Creek, GA
Edelbrock Parts Installed: PRO FLO 4
HP and TQ: 440 HP / 460 TORQUE
Testimonial: Edelbrock 350 Crate Engine, Pro Flo 4, Progressive Nitrous Controller & Edelbrock Nitrous System all working great together!!



Michael Hunt

Location: Simi Valley, CA
Edelbrock Parts Installed: Edelbrock Performer Intake Manifold, Edelbrock Shorty Headers, Edelbrock 650 AVS 2 carburetor
HP and TQ:
Testimonial: For years I've been running a 650 Edelbrock AVS Thunder Series carb on my AMX with a nicely built AMC 360 with an Edelbrock Performer intake, and Edelbrock Shorty Headers. The drivetrain is the stock Borg Warner automatic and 3.31:1 gears in back. I decided it was time to try the 650 AVS 2. I also did some before and after 0 to 60 runs with the early AVS and the new AVS 2. I was amazed to find that my 0 to 50 time in first gear improved nearly 4 tenths of a second at .37 seconds quicker. Love it.



Bill Siebka

Location: Corsica, PA
Edelbrock Parts Installed: #1406, Intake and air cleaner
HP and TQ: 350 HP
Testimonial: I had built my own chassis, body and firewall. I wanted an old school street rod that nobody else had. Your products helped make the build simple and look great, thanks.



Douglas Venn

Location: Cork, Ireland
Edelbrock Parts Installed: E Street aluminum Heads, polished aluminum manifold
HP and TQ: 300 HP
Testimonial: I have a super wife - this 1974 Corvette was her birthday present to me several years ago. Since then, I have upgraded both the performance and the look with the addition of Edelbrock E street heads and a polished aluminum manifold along with improvements to the ignition, cooling and the side exhausts. Recently, in doing some engine work I ran into a problem - the immediate response by Edelbrock Tech Support - David, Bruce and Max - has been nothing short of brilliant. Thank you all soooooooooo....................much!!



David Slade

Location: North Kingstown, RI
Edelbrock Parts Installed: #1905
HP and TQ: 365 HP
Testimonial: Just replaced carburetor with new #1906 looks and runs great still need to adjust but runs great



Mark Hotte

Location: Glensfalls, NY
Edelbrock Parts Installed: Edelbrock dual quad intake, 2 600 performer carbs, air cleaner, valve covers and timing cover
HP and TQ: 600 HP 500 TQ
Testimonial: Next on my list is Edelbrock aluminum heads and Edelbrock dual quad nitrous set up, getting there! Hope you enjoy the picture .



Sam Hutton

Location: Glendale, AZ
Edelbrock Parts Installed: eForce Supercharger
HP and TQ:
Testimonial: I installed the eForce supercharger on my 2014 Jeep Wrangler Rubicon and have passed two milestones. The Jeep passed AZ emission inspection and test, and I just passed 40.000 miles since installation. The Jeep is my daily driver and continues to make me smile every time I hear the blower whine. Thank you for such a well engineered product. Sam



Bertan Kizilduman

Location: Antalya, Turkey
Edelbrock Parts Installed: Pro-Flo Univerdal Air Filter
HP and TQ:
Testimonial: Edelbrock is a huge company. You produce high quality products, I would suggest to anybody. I will follow the Edelbrock company from Turkey. Thank you very much and thanks for making an excellent company!



Scott Schaaf

Location: Dolton, IL
Edelbrock Parts Installed: 500 cfm Performer Carb
HP and TQ:
Testimonial: 1932 Ford, 327 Chevy, Muncie 4 speed, 57 Chevy differential, 68 Mustang steering box, 78 Olds tilt column, 65 Pontiac buckets, US wheels, MT tires, rumble seat.



Howard Lederfind Jr

Location: Ellenboro, NC
Edelbrock Parts Installed: Edelbrock 1405 Carb with auto choke kit, tech line recommended metering rods, springs and jets adjustments
HP and TQ:
Testimonial: I purchased a used 1405 Edelbrock and had it professionally rebuilt and an electric choke kit added. I installed it on a built IH 392 v-8 in a '73 International Scout II. It idled fine, but did not have good throttle response. After a couple of calls to the tech line and a few recommended changes to jets, metering rods and springs, there was an incredible change in performance! I LOVE the "easy to work on" design of the carb... especially that I don't have to remove it to swap springs, rods and jets!



Seth Lukesic

Location: Coeur d Alene, ID
Edelbrock Parts Installed: 1411 Carb, Performer Intake Manifold
HP and TQ: 400 HP / 650 TQ
Testimonial: I’ve ran Edelbrock 1411’s on my last three big block motors. All 3 ranging from 300-500 hp with different mods, my Edelbrock carb and intake manifold have always been very easy to tune and run smooth yet let the big block eat when you hammer down.



Russell Turnock

Location: Palm Coast, FL
Edelbrock Parts Installed: E-force supercharger
HP and TQ: 625 HP
Testimonial: Had some calibration issues and called tech support and they were fantastic, they got me a new tune sent and it is running great now. Absolutely one of the best support centers I have ever dealt with in my 44 years in this industry!



Kevin Perkins

Location: Nanaimo, BC Canada
Edelbrock Parts Installed: Edelbrock E-Street2 EFI Throttle Body Kit, Edelbrock Fuel Sump, Edelbrock Ignition Control Distributor
HP and TQ:
Testimonial: Installed my EFI system in April 2017, on my 5 Liter HO, from a 89 Mustang in my 1956 Ford F-100 pickup with AOD automatic. Engine has run smoother and more efficient since, wish I had done this 5 years earlier when I put truck on the road after building it. I live in a cooler damper climate here in Canada and the cold starts improved so much it’s incredible. I have had a few minor issues with the system but Edelbrock’s technical support team are second to none and helped me sort things out in short order. Excellent aftermarket EFI system. Visited Edelbrock in Torrance and they fine tuned system while on 6500 mile road trip of USA.



Angela Metcalf

Location: Sugarland, TX
Edelbrock Parts Installed: E-force 2300
HP and TQ: 580 HP / 565 TQ
Testimonial: The E-force blower has been trouble free for 36k miles so far on my 2016 Camaro SS. It was featured on All Girls Garage under "Prototype Camaro". We can't wait for the 2650 to be available for my Husbands 2017 Zl1!



Kenneth Francis

Location: Brookings, OR
Edelbrock Parts Installed: Carburetor, air cleaner
HP and TQ: 350 HP / 425 TQ
Testimonial: I’ve been building this 1999, 350cci It’s been going pretty smoothly and I’m only buying the best.



David Rolin

Location: Portland, OR
Edelbrock Parts Installed: EFI Manifold
HP and TQ: 535 HP
Testimonial: I've used Edelbrock equipment on builds since the 1960s. This manifold on my Challenger powered Magnum completed the engine bay package. (90mm throttle body, EFI manifold, CAI)



Miles Pace

Location: Lake Jackson, TX
Edelbrock Parts Installed: Intake Manifold
HP and TQ: 300 HP
Testimonial: Runs great!



Ronald A Gooden

Location: Mims, FL
Edelbrock Parts Installed: Edelbrock Performer Intake with a 600cfm Edelbrock carb.
HP and TQ: 290 HP
Testimonial: I have used Edelbrock since the 1960's on my cars and motorcycles, I had flatheads that I used with the aluminum Edelbrock heads. I now drive this 1950 Chevy 3100 with a 350 shoehorned in. I plan on a new AVS2 carb in a couple of weeks, one thing Edelbrock knows is carbs.



Scott Sobie

Location: Streetsboro, OH
Edelbrock Parts Installed: Victor Jr. Intake, and Performer RPM Heads
HP and TQ:
Testimonial: Edelbrock has always been the best in my eyes for Oldsmobile performance!



Christopher Schmiedt

Location: Cleveland, OH
Edelbrock Parts Installed: E-Force 1583
HP and TQ:
Testimonial: I just got to say Chris and Tony in support rock. Patient and very helpful. Love this product, would absolutely install again on my next truck. Really gentlemen good job!



Don Duffy

Location: Lanoka Harbor, NJ
Edelbrock Parts Installed: Duel Carburetors
HP and TQ: 500 HP
Testimonial: Great ride!



Charles Youngblood

Location: Streator, IL
Edelbrock Parts Installed: Pro Flo XT, Edelbrock Racing valve covers.
HP and TQ:
Testimonial: I was searching for a new induction system for the new crate engine that I had bought for my '85 Corvette. I read an article that was about a comparison of the Pro Flo against the Superram and the Pro Flo made more power. I liked it's looks the bottom is just like the old TR1Y tunnel ram manifold I used to run on my small block Vega!



Peyton Bishop

Location: Nixon, TX
Edelbrock Parts Installed: 650 Performer Carburetor and Performer Intake Manifold
HP and TQ:
Testimonial: After installation I've notice a jump in performance and a smoother riding motor. Gotta love Edelbrock on any classic!



Jim Purvis

Location: Newbury Park, CA
Edelbrock Parts Installed: Performer Air Gap Endurashine Manifold, 1407 750 cmf carburetor, Edlebrock electric fuel pump
HP and TQ: 408 HP / 466 TQ
Testimonial: I have a new Smeding 383 Crate engine with the Edlebrock Air Gap manifold and a 750 Edlebrock carburetor, 408 HP, 466 Lbs of torque, Turbo 450 Transmission, 9 " Ford rear end, 292 posi gears, disc brakes 2 " dropped spindles, Possi 3 "dropped reversed eye rear springs, Leather interior, pin striped, Red & white, American Torque Thrust 15 " wheels. Definitely a driver to Dallas Texas, Salt Lake City Utah, Lincoln Nebraska, Del Mar Ca., Pleasenton Ca., Reno Nv. Have had a lot of fun driving all over everywhere, always creates a stir wherever we go.



Charles T Johnson

Location: Eaton, OH
Edelbrock Parts Installed: 390 Ford Dual Fours Intake and Edelbrock Carbs
HP and TQ: 450 HP
Testimonial:



Brian Adkins

Location: Pueblo, CO
Edelbrock Parts Installed: 60995 heads, Performer RPM camshaft, timing chain, 750 electric choke carb, GM square bore intake.
HP and TQ:
Testimonial: I have used Edelbrock parts for over 30 years. Never had a failure in any parts. Great American Company.



Kobe Mcelwee

Location: Bremen, GA
Edelbrock Parts Installed: Performer Series 600cfm
HP and TQ:
Testimonial: Great product I would suggest to anybody with older truck/car.



Gino Opice

Location: Cannonsburg, PA
Edelbrock Parts Installed: PRO-FLO 3, 3605 Fuel Sump System, 72cc Performer D-port heads, high-flow water pump, and timing cover.
HP and TQ: 550 HP / 575 TQ
Testimonial: I decided to take a 1978 Pontiac Trans AM with the W72 400 CID and bring it forward in the engine evolution. I did what Pontiac could of and should of done if they kept the 400 CID in production, and believe that this is a good shot at what it might of become. Edelbrock has allowed me and everyone else to make there car evolution come to fruition, and I thank Vic Edelbrock and his talented company of employees for this!



Dario Ruiz

Location: Tampa, FL
Edelbrock Parts Installed: 750 Performer
HP and TQ: 450HP
Testimonial: Sure beats the hell out of the Rochester Quadrajet. Response and efficiency.



Carl Hall

Location: South Waikato, New Zealand
Edelbrock Parts Installed: Performance manifold and 600 carb
HP and TQ:
Testimonial:



Alan Westfall

Location: Columbus, OH
Edelbrock Parts Installed: Edelbrock 600cfm carb on a vintage Edelbrock D4B intake manifold.
HP and TQ:
Testimonial: I've used lots of Edelbrock products over the years and won't use anything else! I'm running an Edelbrock 600 cfm carb and D4B intake on a 360 Small block Mopar in my 72 Dodge Tradesman. Never fails to wake up every spring and never falls out of adjustment. Best carb I've ever bought! Thanks Edelbrock.



Joe Clayboss

Location: Trooper, PA
Edelbrock Parts Installed: Fuel system
HP and TQ: 700 HP
Testimonial: Edelbrock has the best quality parts for the money and reliable for street/strip use... and you can always count on Edelbrock... Thank you...



Tom Harris

Location: Surprise, AZ
Edelbrock Parts Installed: Dual 650 carbs
HP and TQ:
Testimonial: While at Del mar good guys, (at the hotel we were staying) I found a note in my car to see Smitty Smith. The next morning I had just arrived at the show and had not had a chance to find your display when Smitty found me. He pointed out that when he was walking the hotel lot where we were staying, he spotted my car. He noticed a vacuum plug had been left out where the original auto choke had been. He had me follow him to the Edelbrock booth and showed me the location of the missing plug. He then found a replacement plug and gave it to me. While this is a part that probably cost less than a dollar, Smitty had gone out of his way to not only spot the problem but to take the time to write the note and then find me at the show. Talk about fantastic service. Smitty converted me to a life long customer Thanks to Smitty Smith.



Steve Matthews

Location: London, England
Edelbrock Parts Installed: Manifold and cam.
HP and TQ:
Testimonial: Pro parts at sportsman price.



Fred Palumbo

Location: West Palm Beach, FL
Edelbrock Parts Installed: Rpm heads, intake, carb,and water pump.
HP and TQ: 400 HP
Testimonial: Great performer RPM top end heads.



John Desabrais

Location: Whitehall, NY
Edelbrock Parts Installed: 1405 600 CFM Edelbrock Carburetor with an EdelbrocK Performer Intake.
HP and TQ: 300 HP
Testimonial: My name is John I'm in the process of building a 1979 Oldsmobile Cutlass Supreme I am using a 1405 600 CFM Edelbrock carburetor with high performance Edelbrock intake the motor runs excellent with this carburetor and intake. I love your product the car is not yet complete I will send a picture of the whole car when complete but for now I'll send the picture of the motor hope to see it posted some day on your site thanks sincerely John.



Cyclepath Outfitters

Location: Marina, CA
Edelbrock Parts Installed: Intake, Carb, Fuel Pump
HP and TQ:
Testimonial: Stoked on the quality parts.



Jerry Jackson

Location: Richmond, TX
Edelbrock Parts Installed: E-Force Supercharger
HP and TQ: 695 HP / 702 TQ
Testimonial: The E-Force added 210 horsepower (43%). The drive-ability is great!



Joe Fyan

Location: Bryant, WI
Edelbrock Parts Installed: Edelbrock Performer RPM Intake Manifold
HP and TQ:
Testimonial: You gotta love this stuff! I installed the new Edelbrock intake and not only does it LOOK better you can really feel the difference in performance! Next thing is saving my pennies for a new Edelbrock carburetor - can't wait! Oh yeah - almost forgot the new Edelbrock cast aluminum valve covers - seriously well built - fit PERFECT and look great - new carb will finish the trifecta for my old 351 Windsor!



Hampton Gilchrist

Location: Cornelius, NC
Edelbrock Parts Installed: Carburetor
HP and TQ: 375 HP
Testimonial: I have an all original numbers, matching 1970 Chevelle 396 CC. My dad and I restored it and now it has become our favorite Sunday driver. Our Edelbrock carburetor is the standard 4 barrel quadrajet that came on the car originally.



Brian Bertlin

Location: Mercer Island, WA
Edelbrock Parts Installed: Performer RPM Power Package - Performer RPM aluminum heads, RPM Air-Gap intake manifold, hydraulic roller cam and lifters, timing chain and gears.
HP and TQ: 540 HP / 539 TQ
Testimonial: This is a beast of an engine. It'll pass anything except a gas station :-). With the fuel injection, it starts right up, has a nice raspy idle and great throttle response.



Arturo

Location: Lodi, CA
Edelbrock Parts Installed: 3702 Edelbrock Cam, Intake
HP and TQ:
Testimonial:



Joshua Carson

Location: St. Ann, MO
Edelbrock Parts Installed: 650 Carb and Intake Manifold
HP and TQ:
Testimonial: Can feel the difference in power and torque.



Robert Preston

Location: Rochester, MI
Edelbrock Parts Installed: E Force Stage 1 Supercharger
HP and TQ: 530 HP / 420 TQ
Testimonial: Installed the Edelbrock Supercharger on my 8000 mile, 2010 Mustang GT...4.6 3V. What a smooth, fast and exciting car to drive now. It’s quick and very responsive. The Edelbrock package is well designed and virtually “plug n play”. Bumped my RWHP from 270 to 452...oh mama!!!



Judy Krause

Location: Minot, ND
Edelbrock Parts Installed: Intake, Carburetor
HP and TQ: 325 HP
Testimonial: Running an Edelbrock Perfomer RPM and a AVS2 650 carb on my 65 Olds Vista Cruiser "PicNicWagon" what a sweet combo for the street...



Dean Pfiffner

Location: Atkins, IA
Edelbrock Parts Installed: Duel quads, Edelbrock manifold, Edelbrock carbs.
HP and TQ:
Testimonial:



Robert Smith

Location: Nokesville, VA
Edelbrock Parts Installed: Edelbrock 600cfm carb and cam
HP and TQ:
Testimonial: Love the products and history, what a great car family supporting all makes and models.



Stephen Fahr

Location: Clovis, NM
Edelbrock Parts Installed: E Force Supercharger
HP and TQ:
Testimonial: Installed on my 2013 Jeep JKU 3.6 liter. Outstanding performance and torque. Great add for on road and off road.



Louie Carmichael III

Location: Ronan, MO
Edelbrock Parts Installed: Edelbrock performer intake, #2152 camshaft and Edelbrock 800 carburetor
HP and TQ:
Testimonial: This my 68 Cutlass Supreme, it has a 425 Olds engine with an Edelbrock cam, intake and carb.



Gwen Brown

Location: Augusta, GA
Edelbrock Parts Installed: 650 endura shine carburetor
HP and TQ: 355 HP
Testimonial: I have installed many Edelbrock Intakes (rpm performer) and carburetors. On multiple motor sizes. In my opinion they are the best with the best tech support.



Alan Corey

Location: Chesnee, SC
Edelbrock Parts Installed: Air gap manifold,Thunder series 650,Engine trim.
HP and TQ: 270 HP
Testimonial: Most of my engine has been trimmed off with Edelbrock aftermarket parts from fuel pump to intake manifold.



Douglas Anderson

Location: Omaha, NE
Edelbrock Parts Installed: 1406 Carburetor
HP and TQ: 260 @ 4200 (Hp) , 365 @ 2800 (Torque)
Testimonial:



Ed Trover

Location: Des Moines, IA
Edelbrock Parts Installed: Carburetor and Intake Manifold
HP and TQ: 562 HP
Testimonial: My 81 short box C10. Built 406 with all forged internals, th350 transmission with reverse shift pattern and trans brake, 12 bolt rear end, and a nitrous shot capable for 190-400 HP.



Robert & Cody Hollasch

Location: Bonnyville, AB Canada
Edelbrock Parts Installed: Edlebrock street tunnel ram
HP and TQ: 786hp & 699.7 tq
Testimonial: Father and Son 56 Chevy truck. This is a 489cu pump gas motor with 10.5cr. Making 786hp on Avery conservative Stuska Dyno. We wanted the real deal on the intake that's meant for street driving to match our real street pump gas project. We are using AFR oval port heads with the Edlebrock tunnel ram. As in the catalog the intake is rated for 3500-7500 rpm, and it does just that. With internal porting and a 1/2 plenum spacer the motor pulls to 7700rpm with a ton of tq through the entire rpm range. We are planning a few minor changes in the motor but will stick with the Edelbrock Street tunnel ram. On a Superflow we aiming for a min of 835hp.



David J Drummond

Location: Hudson, OH
Edelbrock Parts Installed: Edelbrock Jr. HEMI heads and two 800 CFM Thunder Series AFB's
HP and TQ: 870 @ 6900 and 740 ft-lbs @ 5600
Testimonial: 572 HEMI in a 64 Dodge 440 - Best Machine Racing Engines built the engine - we chose the Edelbrock heads as they were impressive castings with great finish and flow right out of the box! This car is called the Hefty HEMI and will compete in the NMCA - Nostalgia Super Stock class! Very happy with the power made on the dyno with the Edelbrock Carbs



Karl Wrobel

Location: Stoddard, WI
Edelbrock Parts Installed: Pro flow 3 efi
HP and TQ: 500hp
Testimonial: My dream when I was 17 was to have a 69 Charger and always wanted a six-pack. That dream came true in September 1997, my senior year. After completing the restoration in 2015, and struggling with that 6 pack for 20 years, I got my best advice to date and installed an Edelbrock pro flow 3 efi system. Better throttle response, more power, better drivability, and sans a 'temperament', I am one happy good ol boy!



Dave Larson

Location: Phoenix, AZ
Edelbrock Parts Installed: Performer 440 intake with a 1411 carb
HP and TQ:
Testimonial: 1965 Plymouth Sport Fury RestMod. 440ci/727. The performance and dependability of Edelbrock can't be beat. My #1 choice for over 40 years.



Ken Strøm

Location: Lillehammer, Norway
Edelbrock Parts Installed: Tbi performer heads, headers, intake and rpm muffler
HP and TQ:
Testimonial: Bought my 454SS like this. Love it!



Sheila Allen

Location: Westchester, CA
Edelbrock Parts Installed: Air Gap Intake, 650 CFM Thunder Series Carb, Performer Cam, SDT Series Mufflers, Edelbrock IAS Series Shocks, Billet Steel Tie Rod Adjusters, Russell Steel Braided Brake Line
HP and TQ:
Testimonial: Edelbrock is one of few quality minded companies left that still builds high quality performance products for AMC's!



Aaron Maxon

Location: Spartanburg, SC
Edelbrock Parts Installed: 600cfm Perfomer Carb, electric choke
HP and TQ:
Testimonial: Needing a new carburetor, we chose the Edelbrock for ease of maintenance and adjustability. It turned out to be a smooth running and easy starting carburetor. Made my 307 seem like a different engine.



Derrick Plank

Location: Johnson City, TN
Edelbrock Parts Installed: Stage 2 Supercharger Kit
HP and TQ:
Testimonial: Last month (October) I purchased the Stage 2 Supercharger kit for my 2014 Mustang GT. I cant believe the horsepower difference. The best part about the purchase and installation was the customer service I received from the Edelbrock support team. The supercharger support staff especially a man named Tony, did a tremendous job. Any time I had a problem or issue, I called him, texted him pictures of what step I was on according to the manual, and he provided the best support I could ask for. He walked me through steps several times. Because of the experience I had with the supercharger support tech named Tony, I will forever be a loyal Edelbrock customer. I ordered the kit through Americanmuscle.com because they were cheaper than CJ Pony Parts and others. So happy with the purchase and performance difference in my car.



Russ Prior

Location: Fallbrook, CA
Edelbrock Parts Installed: Pro-Flow 3 XT, Universal EFI Fuel Sump, Elite II Valve Covers
HP and TQ: 290 | 320
Testimonial: Have always run carbs in the past with good results overall. However, I wanted "that" new car EFI drivability for my classic truck. Cold start and overall drivability have improved dramatically. The idle characteristics are much smoother and throttle response is "crisp". Instructions are clear and EFI techs take the time to answer questions; excellent overall quality.



Larry Marsaglia

Location: Drexel Hill, PA
Edelbrock Parts Installed: Kit #20854 Dual Quad Manifold and Thunder Series Carbs
HP and TQ:
Testimonial: My 1930 Ford Vicky with Edelbrock RPM Air Gap manifold and Thunder Series Carbs. All done in endurashine finish; complemented with Edelbrock Dual Quad Air Cleaner. Runs as good as it looks...



Daniel Estrada

Location: Watsonville, CA
Edelbrock Parts Installed: Carborator, manifold
HP and TQ:
Testimonial: I have a 600 on my 61 Impala it has a 5.7 (350) out of a 92 Camaro it has the roller cam it has t50 5 speed with boss 338 18x8 front 20x10 rear the car with the carb gets between 19 to 20 miles to gallon freeway and if I keep my foot out of it 12 in town. The carb was easy to put on and adjust. My car runs great with it no problems thanks!



Al Dompieri

Location: Forked River, NJ
Edelbrock Parts Installed: Performer 500cfm carb w/ electric choke, performer intake manifold
HP and TQ: 300 HP
Testimonial: Many people told us that building a performance Oldsmobile 307 Engine could not be done. By adding an Edelbrock Performer Carb and intake, matched to a carefully rebuilt engine, my 1986 Oldsmobile 442 has more power than ever! It runs smooth, and feels better than a new car. Our shop, On Point Automotive in Point Pleasant Beach NJ recommended we go with Edelbrock, and they built a winner!



Chris Butler

Location: Burbank, CA
Edelbrock Parts Installed: Edelbrock modified 60759 heads with the RPM air gap.
HP and TQ: NA
Testimonial: These heads were a good bang for the buck with room to grow vs the cam that I am running.Not a Edelbrock cam so I will not post the cam or the specs.7.42 in the 8th mile and these heads will flow a bit more with more cam.



Howard Crull

Location: Fieldon, Il
Edelbrock Parts Installed: 2 800cfm(1412) carbs on a CH-28 dual quad edelbrock manifold
HP and TQ: 425 HP
Testimonial: Running in Nostalgia Super Stock Inc. 426 wedge engine small ports 727 auto 4.11 Dana.



Scott Meyer

Location: Fountain Valley, CA
Edelbrock Parts Installed: Supercharger
HP and TQ:
Testimonial: Quite the spirited daily driver. Drives just like stock except way more power everywhere. Smoke em if you got em!



Malcom Daly

Location: League City, TX
Edelbrock Parts Installed: Intake Manifold
HP and TQ: 350 HP
Testimonial: This has been a joy to work on for the last 5 years. The only thing left to do is install your total power package top end kit. Can't wait to get it in.



Christopher Webster

Location: Chicago, IL
Edelbrock Parts Installed: Fuel Injection
HP and TQ: 600 HP
Testimonial:



Jimmy Dugan

Location: Indian Trail, NC
Edelbrock Parts Installed: 402 BB with Edelbrock 650 cfm
HP and TQ: 400+ HP
Testimonial: Best company out there for dependability and durability!



Tom Spina

Location: Staten Island, NY
Edelbrock Parts Installed: Throttle Body
HP and TQ:
Testimonial: Looking for more HP, going to install manifold and headers next. Or go for E-Force supercharger!!!



Tony Richart

Location: North Vernon, IN
Edelbrock Parts Installed: 1406 carburetor, intake, valve covers
HP and TQ: 350 HP
Testimonial: I decided to use Edelbrock because of the adjustability and the appearance in the equipment. They take pride in their product.



Joseph Sokola

Location: Hartford, CO
Edelbrock Parts Installed: Edelbrock intake
HP and TQ: 375 HP
Testimonial:



Al Adams

Location: Conyers, GA
Edelbrock Parts Installed: Performer 289
HP and TQ: 295 HP / 300 TQ
Testimonial: have used Edelbrock products for almost 30 yrs and have always found the fit, finish, and performance 2nd to none. My Performer 289 intake is no exception. It performs well and matches the needs of my street 289 in my '68 Cougar perfectly (Comp XE 256, Freebie Summit Carb, 1 5/8" full length headers). And Edelbrock's customer service is also top notch.



Michael C. Madland

Location: Fort Worth, TX
Edelbrock Parts Installed: Intake
HP and TQ: 1000+ HP / 800+ TQ
Testimonial: Been running Edelbrock Performance products since the early 1980's. True 10.5 1972 SS Nova, 580 c.i. BBC.



Steve Isgett

Location: Sophia, NC
Edelbrock Parts Installed: Carburetor
HP and TQ: 330 HP
Testimonial: I've tried those other carbs but always came back. To me The Edelbrock is the carb for my setup 1936 ford 355 Chevy a rad Rattler roller 30 over 700 R backing it up. A great head turner.