Elite Race™ Dual Valve Springs: 1.549" O.D. Outer, .719" I.D. Inner

Available Soon

Elite Race™ Double Valve Springs from COMP Cams® have a .700″ to .800″ maximum lift and outside diameter of 1.549″. The best in durability and load loss prevention, and designed for use with roller cams, they are widely used in Dirt Late Model and Asphalt applications, as well as serious bracket race engines.

The metallurgists at COMP Cams® scrutinize every piece of metal utilized in the creation of Elite Race Valve Springs to make sure they are of unsurpassable quality because fissures within the metal of standard spring wire, caused by molecular contaminants, are the weakest link in valve spring construction. These fissures appear to be immense under the Scanning Electron Microscope but in fact, are just microns wide. Diminishing the occurrence of these fissures in our valve spring steel is the COMP Cams® standard when selecting materials.

Max Lift: 0.825
Installed Height: 2.05
Coil Bind Height: 1.165
O.D. of Outer: 1.56
I.D. of Inner: 0.709
I.D. of Outer: 1.114
Spring Style: Dual
Spring Rate: 544
Seat Pressure: 225
Damper: Yes
Component Part Number
Spring Cup (O.D. Locator): 4700-16
Spring Seat (.570" Guide Dia.): 4781-16
Spring Seat (.630" Guide Dia.): 4782-16
Steel Retainers: 748-16  /   732-16
Tool Steel Retainers: 1732-16