Elite Race™ Triple Valve Spring: 1.677" O.D. Outer, .872" I.D. Middle, .635" I.D. Inner

Available Soon
$56.66 $62.95

Elite Race™ Triple Valve Springs from COMP Cams® have a 1.000″ maximum lift and outside diameter of 1.677″. Designed for use with roller cams and with a 9,000 to 10,000 RPM capacity, they are widely used in Pro Stock and Competition Eliminator, as well as marine and tractor pull applications.

The metallurgists at COMP Cams® scrutinize every piece of metal utilized in the creation of Elite Race Valve Springs to make sure they are of unsurpassable quality because fissures within the metal of standard spring wire, caused by molecular contaminants, are the weakest link in valve spring construction. These fissures appear to be immense under the Scanning Electron Microscope but in fact, are just microns wide. Diminishing the occurrence of these fissures in our valve spring steel is the COMP Cams® standard when selecting materials.

Max Lift: 0.979
Installed Height: 2.2
Coil Bind Height: 1.161
O.D. of Outer: 1.686
I.D. of Inner: 0.864/0.624
I.D. of Outer: 1.203
Spring Style: Triple
Spring Rate: 712
Seat Pressure: 342
Damper: No
Component Part Number
Spring Cup (O.D. Locator): 4708-1
Spring Seat (.570" Guide Dia.): 4786-1
Titanium Retainers: 735-1  /   739-1
Titanium Retainers (Lightweight): 722-1