Godzilla Stage 1 NSR/NTR Hydraulic Roller

The Godzilla Stage 1 NSR/NTR is a drop in camshaft upgrade designed to provide amazing drivability and throttle response while producing increased torque across the entire RPM range with a significant horsepower bump with minimal effort.

In stock

The Godzilla Stage  1 NSR/NTR cam utilizes the full phaser sweep for excellent mileage and optimized performance, without compromising durability. It requires no adjustment to the factory cam phasing or ignition timing without the need for a limiter. However, minimal ECU tuning may be required to meet the maximum potential. Testing with an optimized tune resulted in over 60 HP and 15 lb-ft over stock with a much broader torque curve. Impressive gains with minimal effort and zero compromise.

Computer Controlled Compatible: Yes
Valve Springs Required: No
Maximum Advance At Camshaft: 16 deg
Engine Family: 7.3L Godzilla
RPM Operating Range: 1500-6300
Grind Number: HTR275HR21
Cam Type: Hydraulic Roller
Camshaft Series: Godzilla
Usage: Street
California Proposition 65: Yes
Advertised Intake Duration: 275°
Advertised Exhaust Duration: 288°
Intake Duration at .050 Inch Lift: 217°
Exhaust Duration at .050 Inch Lift: 229°
Intake Valve Lift: 0.598in
Exhaust Valve Lift: 0.605in
Lobe Lift Intake: 0.332in
Lobe Lift Exhaust: 0.336in
Lobe Separation: 121°
Intake Centerline: 105°
Exhaust Close ATDC: 23°
Intake Open BTDC:
Exhaust Open BBDC: 72°
Intake Close ABDC: 34°
Lifter Type: Roller Tappet
Recommended Cold Lash Setting - Intake: Hyd
Recommended Cold Lash Setting - Exhaust: Hyd
Direct Injection: No
VVT Compatible: Yes
Phaser Requirement : None