Godzilla Stage 3 Hydraulic Roller

The Godzilla Stage 3 camshaft is made for engine swaps into lighter vehicles and those seeking maximum horsepower while still utilizing the phaser with a limiter kit. This cam brings the exhaust note that is worthy of the Godzilla name.

In stock

The Stage 3 cam is designed for crate engines and engine swaps into lighter cars or trucks for best overall performance. This cam will produce well over 600 horsepower on pump gas! Awesome power can be expected from 5,000 to 6,700 RPM with the valve spring kit (#7230GCS-KIT) and a phaser limiter (#5473). Testing with the 5473 phaser limiter kit resulted in nearly 100 HP and 25 lb-ft over stock. This much horsepower will make even Godzilla fly.

Computer Controlled Compatible: Yes
Valve Springs Required: Yes
Maximum Advance At Camshaft: 5 deg
Engine Family: 7.3L Godzilla
RPM Operating Range: 2500-6700
Grind Number: GLS295HR17
Cam Type: Hydraulic Roller
Camshaft Series: Godzilla
Usage: Street
California Proposition 65: Yes
Advertised Intake Duration: 295°
Advertised Exhaust Duration: 308°
Intake Duration at .050 Inch Lift: 237°
Exhaust Duration at .050 Inch Lift: 250°
Intake Valve Lift: 0.671in
Exhaust Valve Lift: 0.671in
Lobe Lift Intake: 0.373in
Lobe Lift Exhaust: 0.373in
Lobe Separation: 117°
Intake Centerline: 112°
Exhaust Close ATDC:
Intake Open BTDC:
Exhaust Open BBDC: 67°
Intake Close ABDC: 51°
Lifter Type: Roller Tappet
Recommended Cold Lash Setting - Intake: Hyd
Recommended Cold Lash Setting - Exhaust: Hyd
Direct Injection: No
VVT Compatible: Yes
Phaser Requirement : Limiter