Magnum Computer Controlled 210/215 Hydraulic Roller Cam for Chevrolet 262/4.3L

Available Soon
SKU
18-415-8
Available Soon items may take 2-4 weeks for delivery.
$400.95

• Retro-Fit Hydraulic Roller Cam; For '85-'87 GM 4.3L/262 cid 90³ V6 Engines Originally Equipped w/ Flat Tappet Cam

• Works w/ Throttle Body (TBI) & Sequential Port Injection (CPI) w/ Aftermarket Chip • Good Low End, Mid-Range

Camshaft Material:
Valve Springs Required:
Assembly Lubricant Included:
Engine Family: Chevrolet 4.3L 262 c.i. 90 Degree 6 Cylinder (1980-1997)
RPM Operating Range: 1,800-5,000
Grind Number: 266HR
Cam Type: Hydraulic Roller
Lifter Style: Hydraulic Roller
Camshaft Series: Magnum Computer Controlled
Usage: Street/Strip
California Proposition 65: WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov
Advertised Intake Duration: 266
Advertised Exhaust Duration: 270
Intake Duration at .050 Inch Lift: 210
Exhaust Duration at .050 Inch Lift: 215
Intake Valve Lift: 0.5
Exhaust Valve Lift: 0.5
Lobe Separation: 112
Exhaust Close ATDC: -8
Intake Open BTDC: -3
Exhaust Open BBDC: 43
Intake Close ABDC: 33
Camshaft Gear Attachment: 3-Bolt
Note Description
1010
3737
Component Part Number
Break-In Lube: 159
CL-Kit Upgrade: CL18-415-8
K-Kit Upgrade: K18-415-8
Lifter Kit: 853-12  /   15853-12
Push Rods: 7809-12  /   7949-12
Rocker Arms: 1412-12  /   1601-12
RP Rocker Push Rod Kit: RPR200-12
SK-Kit Upgrade: SK18-415-8
Steel Retainers: 740-12  /   795-12
Timing Set: 2100  /   3100
Valve Locks: 611-12  /   614-12
Valve Seals: 503-12
Valve Springs: 986-12  /   26986-12