Magnum Computer Controlled 210/215 Hydraulic Roller Cam (Non-Balance Shaft) Chevrolet 262/4.3L


• Hydraulic Roller Cam; For '87-'94 GM 4.3L/262 cid 90³ V6 Non-Balance Shaft Engines w/ Hyd. Roller Cam* 

• Works w/ Throttle Body & Sequential Port Injection w/ Aftermarket Chip • Good Low End & Mid-Range

• Adjustable Valve Train Required

*Balance shaft equipped 4.3L engines were introduced in '92 but GM continued to produce the previous version until '94. Non-balance shaft 4.3L's ('85-'94) shared their timing cover with the small block Chevy V8 engine. The balance shaft 4.3L's timing cover is noticeably taller than the non-balance shaft version.

Grind Number: 266HR
Engine Family: Chevrolet 4.3L 262 c.i. 90 Degree 6 Cylinder (1987+) Non-Balance Shaft
RPM Operating Range: 1,800-5,000
Cam Type: Hydraulic Roller
Lifter Style: Hydraulic Roller
Camshaft Series: Magnum Computer Controlled
Camshaft Gear Attachment: 3-Bolt
Usage: Street/Strip
Valve Springs Required: Yes
Camshaft Material: Austempered Ductile Iron
California Proposition 65: WARNING: Cancer and Reproductive Harm
Advertised Intake Duration: 266
Advertised Exhaust Duration: 270
Intake Duration at .050 Inch Lift: 210
Exhaust Duration at .050 Inch Lift: 215
Intake Valve Lift: 0.5
Exhaust Valve Lift: 0.5
Lobe Separation: 112
Assembly Lubricant Included: No
Valve Timing @ 0.006 Lift:
Exhaust Close ATDC: 19
Exhaust Open BBDC: 71
Intake Open BTDC: 25
Intake Close ABDC: 61
Note Description
37Adjustable valve train required
Component Part Number
Break-In Lube: 159
CL-Kit Upgrade: CL09-415-8
K-Kit Upgrade: K09-415-8
Lifter Kit: 850-12
Push Rods: 7808-12  /   7940-12
Rocker Arms: 1417-12
RP Rocker Push Rod Kit: RPH300-12
SK-Kit Upgrade: SK09-415-8
Steel Retainers: 730-12  /   740-12
Timing Set: 3136
Valve Locks: 611-12
Valve Seals: 503-12
Valve Springs: 987-12  /   986-12