Memorial Day Lunati Valvetrain Sale Shop Now

Performer Holden Intake Manifold 253-308

$513.95
Edelbrock Performer Intake Manifold for Holden 253-308 c.i.d Engines. Accepts Either OEM 4-bbl or 4150-Style Square-Bore Carburetors.
In stock
SKU
2194
The Edelbrock Performer #2194 intake manifold is designed for street 253-304-308 c.i.d. Holden V8 engines. This Performer intake manifold is a dual-plane design that is tuned for excellent throttle response from idle to 5500 rpm. The Performer Holden manifold has been designed to fit both cylinder head bolt hole patterns. Pilot holes have been drilled on each side of the exhaust crossover for early or late model cylinder heads and will need to be drilled out depending on application. Will not fit EFI Heads (see Edelbrock #7594). Accepts both square-bore and spread-bore carbs. Fits Red/Blue/Black engines. Does not have a provision for external heat crossover. Includes Edelbrock square-bore carb adaptor plate #2732, carb gasket and carb studs. The Edelbrock Performer #2194 intake manifold is a dual-plane, low-rise intake manifold with a 180? firing order and patented runner design that you won't find in other brands. This patented design greatly improves torque over a wide rpm range for excellent throttle response, especially off-idle through the mid-range. The Performers are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. The Edelbrock Performer #2194 also features a natural aluminum finish for a classic look. For the ultimate "Made in USA" quality, every Edelbrock intake manifold is cast and machined in the USA.

Installation Notes:
• Recommended intake gasket: stock gasket set or equivalent.
• Do not use high performance or competition type intake gaskets for street application. Due to material deterioration under street driving conditions, internal leakage of both vacuum and oil may occur.
• Manifold height: A-3.25”, B-4.67”
• Carb pad height: 3.96”
• Port exit dimensions: 1.07” x 1.83”
• Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.
• Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347021949
Series Performer
Grade Type Performance
Gasket Or Seal Included No
Vehicle Model Holden
Availability Note Available to Order
Warranty 12 Months
RPM Range Idle-5500 RPM
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Color Satin
Finish Satin
Material Aluminum
Rear Maximum Height 4.670 in
Single Or Dual Plane Type Dual