Skip to the beginning of the images gallery

Performer RPM Pontiac 326-455 Intake Manifold, Black Plasma Finish

$629.95

Edelbrock Performer RPM Pontiac Intake Manifold for Pontiac 326-455 V8 with a beautiful Black Plasma finish.

In stock

SKU

7156-BP

Details

Edelbrock part #7156-BP Performer RPM Pontiac intake manifold is designed for 1965-79 street 326-455 c.i.d. Pontiac V8's (except Ram Air V and 265/301 V8's). The PN 7156-BP version comes with a beautiful reflective Black Plasma finish that is durable and easy to maintain. The Plasma finishes are applied by a fully automated 7 stage prewash and 4 stage finish. A durable clear powder coat finises the process. Recommended for high-performance street, strip and marine. Has clearance for HEI distributor. Will not fit under Trans Am Shaker hood without modifications

PRODUCT SPECS

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347898411
Vehicle Model	Pontiac
Series	Performer RPM
Grade Type	Performance
Gasket Or Seal Included	No
Availability Note	Available to Order
Warranty	12 Months
RPM Range	1500-6500 RPM
EGR Port	No
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7280; No provisions for OEM choke; OEM carb requires conversion to electric/manual choke; Carb recommendations: Edelbrock Thunder Series AVS, AVS2 or Performer Series 650-800 cfm.; For 1968-71 use Edelbrock #8015 throttle bracket; Manifold height: 1-1/4" taller than stock, A-6.88", B-8.00" measured to engine block; Carb pad height: 7.45"; Port exit dimensions: 1.10" x 2.06"; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Black Plasma
Material	Aluminum
Rear Maximum Height	8.000 in
Single Or Dual Plane Type	Dual