Lunati HOT Summer Deals on Valve TrainShop Now

Performer RPM Small Block Chrysler Intake Manifold

Edelbrock Performer Intake Manifold for 318-340-360 Chrysler Small Block LA engines
In stock
Edelbrock Part # 7176 Performer RPM intake manifold is designed for 340-360 c.i.d. Chrysler V8's and 318 c.i.d. engines with 340-360 cylinder heads. Latest technology in dual-plane design results in both excellent low-rpm torque and outstanding high rpm horsepower. Recommended for high-performance street, strip and fresh water marine applications. Accepts 1975 and earlier waterneck only. Will not accept stock Thermo-Quad carburetor. Will not fit 1992 and later Magnum engines. Match with Performer RPM heads #60779 for maximum performance.
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347071760
Series Performer RPM
Gasket Or Seal Included No
Vehicle Model Chrysler
Availability Note Available to Order
Warranty 12 Months
RPM Range 1500-6500 RPM
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit
Installation Notes
  • Recommended intake gasket: Edelbrock # 7276, Fel-Pro # 1213, Chrysler # 4397642 (or equivalent) for 340 & 360.
  • Manifold height: A-4.9", B-5.8"
  • Carb pad height: 5.35"
  • Carb recommendations: Edelbrock AVS2 or Performer Series 650-800 cfm. Use # 1481 or # 1843 throttle/transmission lever kit.
  • Port exit dimensions: 1.01" x 2.17"
  • 1979 and later rotary A/C compressor will not clear waterneck
  • Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
  • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish Satin
Material Aluminum
Rear Maximum Height 5.800 in
Single Or Dual Plane Type Dual