Stars & Stripes Sale on American-Made MuscleShop Now

RPM Small-Block Chrysler Magnum Cylinder Head Hydraulic Flat Tappet

was $1,156.50 Special Price $1,040.85
Edelbrock part #61779 Performer RPM cylinder heads are designed for use with 1992 & later 5.2L (318 c.i.d.) and 1993 & later 5.9L (360 c.i.d.) Chrysler Magnum style V8 applications.
In stock
SKU
61779
The Edelbrock #61779 Performer RPM cylinder heads are designed for use with 1992 & later 5.2L (318 c.i.d.) and 1993 & later 5.9L (360 c.i.d.) Chrysler Magnum style V8 applications. The Edelbrock #61779 Performer RPM heads are perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. These cylinder heads deliver great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs. For use on pre-pollution controlled vehicles only.

INSTALLATION NOTE:
• EQUIPPED WITH SPRINGS FOR USE IN HYDRAULIC FLAT TAPPET CAMSHAFT APPLICATIONS
• Match with the Edelbrock RPM Air-Gap Magnum manifold #7577
• Cylinder heads exhaust flanges in stock location to allow use of stock exhaust if desired
• Accepts small-block Chevy adjustable 1.6 ratio rockers and classic valve covers #4177 and #41773
• Requires hardened pushrods, #9638.
• Match with Edelbrock head gasket sets.
• Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat.
• Deck thickness: 5/8"
• Rocker stud diameter: 3/8"
• Pushrod diameter: 5/16" (width of slot in guide plate).
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347617791
Series Performer RPM
Grade Type Performance
Quantity Sold Individually
Guide Plate Material Hardened Steel
Camshaft Type Flat Tappet
Horsepower 350-500 HP
Availability Note Available to Order
Warranty 12 Months
Seat Angle Exhaust 45 deg/Intake 45 deg
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Intake Valve Diameter 2.02 in
Intake Runner Volume 176 cc
Material Aluminum
Push Rod Diameter 0.312 in
Rocker Stud Diameter 0.375 in
Valve Angle 18 deg
Valve Spring Diameter 1.46 in
Valve Spring Maximum Lift 0.580 in
Valve Stem Diameter 0.3438 in