Lunati HOT Summer Deals on Valve TrainShop Now

RPM Small-Block Ford 1.90" Cylinder Head Hydraulic Flat Tappet Cam

The Edelbrock #60229 Performer RPM cylinder heads are designed for use with 289-351W Small-Block Ford applications. The #60229 heads are perfect for street performance, daily drivers and muscle cars where more performance is needed.
In stock
The Edelbrock #60229 Performer RPM cylinder heads are designed for use with 289-351W c.i.d. Small-Block Ford applications. The Edelbrock #60229 Performer RPM heads are perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. These cylinder heads deliver great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs. For use on pre-pollution controlled vehicles only.
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347602292
Series Performer RPM
Quantity Sold Individually
Guide Plate Material Hardened Steel
Camshaft Type Flat Tappet
Horsepower 325-500 HP
Availability Note Available to Order
Warranty 12 Months
Seat Angle Exhaust 45 deg/Intake 45 deg
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit
Installation Notes
  • 1.90" intake valves are for use with stock pistons
  • Hardened pushrods required, use Edelbrock #9632 (flat tappet only).
  • Will not accept rail rockers.
  • 289-302 V8s require Head Bolt Bushings #9680 and either Head Bolt Kit #8552 (7/16") or stock head bolts. Match with Edelbrock head gasket sets.
  • Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat.
  • Designed for non-emissions 289, 302, and 351-Windsor Ford engines
Intake Valve Diameter 1.90 in
Intake Runner Volume 170 cc
Material Aluminum
Push Rod Diameter (Suggested) 0.3125 in
Rocker Stud Diameter 0.375 in
Valve Angle 20 deg
Valve Spring Diameter 1.46 in
Valve Spring Maximum Lift 0.575 in
Valve Stem Diameter 0.3438 in