Victor Small-Block Chrysler Cylinder Head W/ Solid Roller Camshaft

Edelbrock part #61729 Victor Series cylinder heads are for use on 1967-1991, 318-360 c.i.d. Chrysler LA engines. They feature fully CNC ported 58cc combustion chambers and have an intake port volume of 225cc.
out of stock
SKU
61729
TEMPORARILY OUT OF STOCK, ORDER NOW!
$2,106.95
These Edelbrock #61729 Victor Series cylinder heads are for use on 1967-1991, 318-360 c.i.d. Chrysler LA engines. They feature fully CNC ported 58cc combustion chambers and have an intake port volume of 225cc. These cylinder heads are an in-line valve design incorporating a 16° valve angle (stock is 18°) for improved air flow and increased power levels over heavily ported stock versions. They also feature the Chrysler W5 bolt pattern and have raised exhaust ports. The intake port has also been raised approximately 3/4" and the flange has also been extended to accommodate a stock (race) intake manifold such as our Super Victor #2815. Finally, a 5.56" overall length valve (+0.600" from stock) and raised rocker cover permit larger port cross-sections than in the stock head. Four versions are available; bare, bare with valves, complete (for hydraulic/flat tappet cams and solid roller cams) and Pro Port Raw. End-seal spacers are provided.

INSTALLATION NOTE:
• EQUIPPED WITH SPRINGS FOR USE IN HYDRAULIC ROLLER CAMSHAFT APPLICATIONS
• These heads are designed to accomodate stock Big Block Mopar Wedge Rocker arm assemblies (.150" minimum intake offset).
Intake Runner Volume: 225 cc
Material: Aluminum
Push Rod Diameter: 0.312 in
Valve Angle: 16 deg
Valve Spring Diameter: 1.55 in
Valve Spring Maximum Lift: 0.670 in
Valve Stem Diameter: 0.3438 in
Intake Valve Diameter: 2.15 in